Skip to content
Legionella Testing

Example report

Example legionella risk assessment report

See exactly what you get before you book. A full report for a simple, everyday building: a boiler room with a hot water cylinder, a kitchen, toilets and two outside taps. Risk assessments start from £200 + VAT.

Get the full example report

All 46 pages, as a PDF. Free.

You can open it straight away, and we email you the link. No mailing list. How we use your details

A look inside, page by page

Eight of the 46 pages, with what each one is for. The building is made up. The layout and the level of detail are the real thing.

  1. Cover of the example legionella risk assessment report

    Page 1 of 8

    The cover

    Your building, the date of the survey and the date the assessment should next be reviewed. In the example the building is made up, and every page says so.

  2. Executive summary page showing an overall risk rating of Moderate and the risk score table

    Page 2 of 8

    One overall risk rating

    The page most people read first. One rating for the whole building (Moderate, in the example), then the reasons in plain words. The score table shows where the building is now and where it will be once the work is done.

  3. Technical recommendations page with a high priority finding and a photograph of a hot water cylinder

    Page 3 of 8

    What to fix, in order

    Every finding says where it is, why it matters and what to do about it, with a photograph. Findings are sorted into high, medium and low priority, each with a time to act by. The column on the right is yours, to sign off each job as it is done.

  4. Scheme of control page listing weekly, monthly and six-monthly checks by asset number

    Page 4 of 8

    Your routine checks

    A scheme of control written for your building: which outlet to flush each week, which temperatures to take each month, and what needs servicing each year. This is the list your logbook is kept against.

  5. Asset table for the hot water cylinder, listing its condition, pipework and temperatures

    Page 5 of 8

    Every heater, vessel and valve

    Each item of plant has its own table: its condition, its pipework and the temperatures measured on the day. In the example the hot water cylinder is at 57.2°C, below the 60°C it should store water at, and that becomes the first finding.

  6. Table of every outlet in the building with its water source, temperatures and how often it is used

    Page 6 of 8

    Every outlet, with its temperature

    Each sink, washbasin, toilet and outside tap is listed with its own number, how often it is used and the temperatures measured. The same numbers are used in the photographs, the findings and the drawing.

  7. Schematic drawing of the example building's hot and cold water system

    Page 7 of 8

    A drawing of your water system

    Where the mains comes in, how the hot water is made and where every outlet is fed from, floor by floor. Dead legs and the outlets used for monthly temperature checks are marked.

  8. Legionella Control Association certificate of registration for Envirisk Ltd

    Page 8 of 8

    Who stands behind it

    Reports are produced by Envirisk Ltd, which is registered with the Legionella Control Association (number 2024/3971). The certificate is in every report.

Get all 46 pages

What every report covers

Written for your building and checked by the QC management team before it reaches you.

  • Conditions of water systems on site
  • Level of risk associated with water systems
  • List of recommendations detailing remedial actions required to attain compliance with the current legislation
  • Validity of legionella control scheme and records
  • An up to date water asset register
  • Schematic drawings of water systems
  • Water temperature profiling of site
  • Details of management personnel
  • Schedule of legionella control tasks

How a risk assessment works, and who needs one

Example report: common questions

Is this a real legionella risk assessment report?

It is the real report layout with a made-up building. The building, the people and the findings are invented. The sections, the tables and the level of detail are what you receive. The photographs are from real surveys of other buildings.

What is in a legionella risk assessment report?

Your level of risk, a list of what to fix in order of priority, a scheme of routine checks, a register of everything on the water system, a schematic drawing, the temperatures measured on the day and the people responsible.

How long is a real report?

It depends on the building. This example, for a small office with one hot water cylinder and 21 items on its water system, runs to 46 pages. Bigger buildings have more to inspect, so their reports are longer.

Can I use the example as my own risk assessment?

No. A risk assessment has to be of your own building's water system, by someone competent to assess it. The example shows what a report looks like. It says nothing about your building.

How much does a legionella risk assessment cost?

A legionella risk assessment starts from £200 + VAT. The price depends on the size and type of your building and how many sites you have. Tell us about your building and the office sends you a free, fixed quote. Water sample tests are priced per sample.

Legionella risk assessments from £200 + VAT

Free, fixed quote within 24 hours. No obligation.

Call usGet my quote